User guide

RFC1483 command reference RFC1483
8-163
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> rfc1483 set transport my1483 txvci 800
See also RFC1483 LIST TRANSPORTS
RFC1483 SET TRANSPORT RXVCI
8.9.1.1.17 RFC1483 SET TRANSPORT TXVPI
Syntax RFC1483 SET TRANSPORT {<name>|<number>} TXVPI <vpi>
Description This command sets the transmit Virtual Path Identifier. If you later set the VPI using the
RFC1483 SET TRANSPORT VPI command, the RXVPI setting will be overridden.
The port/VCI/VPI combination must be unique for each transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing RFC1483 transport. To
display transport names, use the
RFC1483 LIST TRANS-
PORTS
command.
N/A
number An existing RFC1483 transport. To
display transport numbers, use the
RFC1483 LIST TRANS-
PORTS
command.
N/A
txvci Part of the ATM header. The TX
VCI is a tag that identifies which
channel a cell will be transmitted
over. The TX VCI can be any value
between 1 and 65535.
VCI value set when the transport was
created using the rfc1483 add trans-
port command