User guide

RFC1483 RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-162
See also RFC1483 LIST TRANSPORTS
RFC1483 SET TRANSPORT TXVPI
8.9.1.1.15 RFC1483 SET TRANSPORT SCR
Syntax RFC1483 SET TRANSPORT
{<name>|<number>} SCR <sustainable cell
rate>
Description This command sets the Sustainable Cell Rate. This command is only valid if you set VBR
or VBR RT as the QoS Class using the RFC1483 SET TRANSPORT QOSCLASS com-
mand.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> rfc1483 set transport my1483 scr 25000
See also RFC1483 SET TRANSPORT QOSCLASS
RFC1483 LIST TRANSPORTS
8.9.1.1.16 RFC1483 SET TRANSPORT TXVCI
Syntax RFC1483 SET TRANSPORT {<name>|<number>} TXVCI <vci>
Description This command sets the transmit Virtual Circuit Identifier channel. If you later set the
VCI using the RFC1483 SET TRANSPORT VCI command, the TXVCI setting will be
overridden.
The port/VCI/VPI combination must be unique for each transport.
Option Description Default Value
name An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS com-
mand.
N/A
sustainable
cell rate
Sustainable Cell Rate; the average cell rate for a VBR
or VBR RT connection. The SCR can be any positive value
that is less than the both PORTSPEED SET (when the
port was created) and the
PCR SET for the channel.
(The port is initialized using the initbun file in F
lashFS or
the CLI command
PORT SET)
0