User guide

RFC1483 command reference RFC1483
8-159
iMG/RG Software Reference Manual (ADSL Port)
Example --> rfc1483 set transport myrfc prilevels 2
See also RFC1483 SHOW TRANSPORT
8.9.1.1.12 RFC1483 SET TRANSPORT QOSCLASS
Syntax RFC1483 set transport {<name>|<number>} QOSCLASS
{UBR|CBR|VBR|VBRRT|ABR|QFC}
Description This command sets the Quality of Service (QoS) class for the transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing RFC1483 transport. To display transport names,
use the
RFC1483 LIST TRANSPORTS command.
N/A
number An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS com-
mand.
N/A
prilevels The number of priority levels available on an ATM transport. 1
Option Description Default Value
name An existing RFC1483 transport. To display transport names,
use the RFC1483 LIST TRANSPORTS command.
N/A
number An existing RFC1483 transport. To display transport numbers,
use the
RFC1483 LIST TRANSPORTS command.
N/A
ubr
Unspecified Bit Rate; non-constant and unpredictable data
transport rate. PCR (
Peak Cell Rate) is the average and max-
imum speed of transmission.
UBR
ubr+
Unspecified Bit Rate plus; is a special ATM service class
developed by Cisco Systems.
cbr
Constant Bit Rate; constant demand and predictable data
transport rate. PCR is the average and maximum speed of
transmission.