User guide

RFC1483 command reference RFC1483
8-157
iMG/RG Software Reference Manual (ADSL Port)
Example --> rfc1483 set transport my1483 mode vcmux
See also RFC1483 LIST TRANSPORTS
8.9.1.1.9 RFC1483 SET TRANSPORT PCR
Syntax RFC1483 SET TRANSPORT {<name>|<number>} PCR <peak cell rate>
Description This command sets the Peak Cell Rate (PCR) for an existing RFC1483 transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> rfc1483 set transport my1483 pcr 50000
See also RFC1483 SET TRANSPORT MCR
RFC1483 LIST TRANSPORTS
8.9.1.1.10 RFC1483 SET TRANSPORT PORT
Syntax RFC1483 SET TRANSPORT {<name>|<number>} PORT <atm-port>
llc
Logical Link Control encapsulation method.
LLC
vcmux VC Multiplexing encapsulation method.
Option Description Default Value
name An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS com-
mand.
N/A
peak cell rate Determines the maximum rate at which ATM cells can be
transported into the ATM network. The PCR can be any
value from 0 up to the maximum PortSpeed parameter set
when the port was created (
PORT a1 SET)
N/A means “0”
Option Description Default Value