User guide

RFC1483 RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-156
8.9.1.1.7 RFC1483 SET TRANSPORT MCR
Syntax RFC1483 SET TRANSPORT {<name>|<number>} MCR <minimum cell
rate>
Description This command sets the Minimum Cell Rate (MCR) for an existing RFC1483 transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> rfc1483 set transport my1483 mcr 0
See also RFC1483 SET TRANSPORT PCR
8.9.1.1.8 RFC1483 SET TRANSPORT MODE
Syntax RFC1483 SET TRANSPORT {<name>|<number>} MODE {LLC|VCMUX}
Description This command sets the mode of encapsulation that an existing RFC1483 transport uses.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name An existing RFC1483 transport. To display transport
names, use the RFC1483 LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To display transport
numbers, use the
RFC1483 LIST TRANSPORTS
command.
N/A
minimum cell
rate
Determines the minimum rate at which ATM cells can
be transported into the ATM network.
0
Option Description Default Value
name An existing RFC1483 transport. To display transport
names, use the RFC1483 LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS com-
mand.
N/A