User guide

RFC1483 command reference RFC1483
8-155
iMG/RG Software Reference Manual (ADSL Port)
Example --> rfc1483 set transport my1483 bt 5
See also RFC1483 SET TRANSPORT MBS
RFC1483 SET TRANSPORT QOSCLASS
8.9.1.1.6 RFC1483 SET TRANSPORT MBS
Syntax RFC1483 SET TRANSPORT
{<name>|<number>} MBS <maximum burst size>
Description This command sets the maximum burst size (MBS) for the RFC1483 transport. This com-
mand is only valid if you set VBR or VBR RT as the QoS Class using the RFC1483 SET
TRANSPORT QOSCLASS command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> rfc1483 set transport my1483 mbs 10
See also RFC1483 SET TRANSPORT BT
RFC1483 SET TRANSPORT QOSCLASS
burst tolerance Controls the duration of traffic bursts on VBR (Variable
Bit Rate) and VBR RT (VBR Real Time) channels. This
value overrides an existing MBS value (if set). The BT
can be any value between 0 and 100 (999999999).
N/A means “0”
Option Description Default Value
name An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To display transport
numbers, use the
RFC1483 LIST TRANSPORTS
command.
N/A
maximum burst
size
Controls the maximum burst size for VBR (
Variable
Bit Rate
) and VBR RT (VBR Real Time) channels.
This value overrides an existing BT value (if set). The
MBS can be any value between 0 and 100(999999999).
N/A means “0”
Option Description Default Value