User guide

RFC1483 RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-154
See also RFC1483 LIST TRANSPORTS
8.9.1.1.4 RFC1483 LIST TRANSPORTS
Syntax RFC1483 LIST TRANSPORTS
Description This command lists all RFC1483 transports that have been created using the RFC1483
add transport command. It displays the following information about the transports:
• Transport identification number
• Transport name
• Name of the ATM port used to transport rfc1483 data
• Transmit and receive vci numbers
• Transmit and receive vpi numbers
Example --> rfc1483 list transports
RFC1483 transports:
ID | Name | Port | TxVci | RxVci | TxVpi | RxVpi
-----|-----------|----------|----------|----------|----------|------
1 | my1483 | a1 | 700 | 700 | 0 | 0
--------------------------------------------------------------------
See also RFC1483 SHOW TRANSPORT
8.9.1.1.5 RFC1483 SET TRANSPORT BT
Syntax RFC1483 SET TRANSPORT {<name>|<number>} BT <burst tolerance>
Description This command sets the Burst Tolerance (BT) that an existing RFC1483 transport uses to
transport data over ATM. This command is only valid if you set VBR or VBR RT as the
QoS Class using the RFC1483 SET TRANSPORT QOSCLASS command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To display transport
numbers, use the
RFC1483 LIST TRANSPORTS
command.
N/A