User guide

ManualsBrandsAllied Telesis ManualsComputer equipmentAT-iMG634 - R2

921

922

923

924

925

926

927

928

929

930

RFC1483 RFC1483 command reference

iMG/RG Software Reference Manual (ADSL Port)

8-152

8.9.1.1.1 RFC1483 ADD TRANSPORT

Syntax RFC1483 ADD TRANSPORT

<name> <port> <vpi> <vci> {

LLC|VCMUX}

{BRIDGED|ROUTED

}

Description This command creates a named RFC1483 transport and allows you to specify the follow-

ing:

• The ATM port that will transport RFC1483 data. (ATM ports are initialized in the

initbun file in flashfs, or using the bun set port console command.)

• VPI (Virtual Path Identifier)

• VCI (Virtual Circuit Identifier)

• LLC or vcmux encapsulation (optional)

• Bridged or Routed (optional)

• The port/VPI/VCI combination must be unique for each transport

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

RFC1483 SET TRANSPORT VCI XXX

RFC1483 SET TRANSPORT VPI XXX

RFC1483 SHOW TRANSPORT XXX

Option Description Default Value

name An arbitrary name that identifies the transport. It can be

made up of one or more letters or a combination of let-

ters and digits, but it cannot start with a digit.

N/A

port The system port that is used to transport ATM data. N/A

vpi A field in the ATM header. The VPI is used to identify the

virtual path that a circuit belongs to. The VPI can be any

value between 0 and 4095.

N/A

vci Part of the ATM header. The VCI is a tag that identifies

which channel a cell will travel over. The VCI can be any

value between 32 and 65535.

N/A

TABLE 8-9 RFC1883 Commands

Commands

Fiber

Modular

ADSL