User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-146
Description This command applies to existing PVC transports - it does not apply to SVC transports.
This command sets the Virtual Circuit Identifier.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa4 vci 800
See also PPPOA LIST TRANSPORTS
PPPOA SHOW TRANSPORT
PPPOA SET TRANSPORT VPI
8.8.1.1.42 PPPOA SET TRANSPORT VPI
Syntax PPPOA SET TRANSPORT {<name>|<number>} VPI <vpi>
Description This command applies to existing PVC transports - it does not apply to SVC trans-
ports.This command sets the Virtual Path Identifier.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
vci Part of the ATM header. The VCI is a tag that identifies
which channel a cell will travel over. The VCI can be any
value between 1 and 65535.
N/A
Option Description Default Value
name An existing PPPoA transport. To display transport
names, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
vpi A field in the ATM header. The VPI is used to identify
the virtual path that a circuit belongs to. The VPI can be
any value between 0 and 4095.
N/A