User guide

PPPoA command reference PPPoA
8-145
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoa set transport pppoa2 theylogin pap
See also PPPOA LIST TRANSPORTS
PPPOA SHOW TRANSPORT
SYSTEM ADD USER
SYSTEM SET USER MAYDIALIN
8.8.1.1.40 PPPOA SET TRANSPORT USERNAME
Syntax PPPOA SET TRANSPORT {<name>|<number>} USERNAME <username>
Description This command sets a (dial-out) username on a named transport. The username is
required when PPP negotiation takes place and is supplied to the remote PPP server for
authentication.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 username jsmith
See also PPPOA SET TRANSPORT PASSWORD
8.8.1.1.41 PPPOA SET TRANSPORT VCI
Syntax PPPOA SET TRANSPORT {<name>|<number>} VCI <vci>
chap
Challenge Handshake Authentication Protocol; the
server sends an authentication request to the remote user dial-
ing in. PAP passes the encrypted username and password and
identifies the remote end.
Option Description Default Value
name An existing PPPoA transport. To display transport names, use
the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport numbers,
use the
PPPOA LIST TRANSPORTS command.
N/A
username A name that identifies a user and, together with the dialout
password, enables a user to login to the remote end. The
PPP server will require the username when the user wants to
login remotely. It can be made up of one or more characters
and/or digits. To display the username, use the
PPPOA
SHOW TRANSPORT
command.
N/A
Option Description Default Value