User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-142
Example --> pppoa set transport pppoa1 routemask 0.0.0.0
See also PPPOA SHOW TRANSPORT
PPPOA LIST TRANSPORTS
8.8.1.1.36 PPPOA SET TRANSPORT SCR
Syntax PPPOA SET TRANSPORT {<name>|<number>} SCR <sustainable cell
rate>
Description This command applies to existing PVC transports - it does not apply to SVC transports.
This command is only valid if you set VBR or VBR RT as the QoS Class using the pppoa
set transport qosclass command.
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 scr 25000
See also PPPOA SET TRANSPORT QOSCLASS
8.8.1.1.37 PPPOA SET TRANSPORT SPECIFICROUTE
Syntax PPPOA SET TRANSPORT {<name>|<number>} SPECIFICROUTE {ENABLED
| DISABLED}
Description This command specifies whether the route created when a PPP link comes up is a spe-
cific or default route. If set to enabled, the route created will only apply to packets for
mask The subnet mask that is used for the route that is cre-
ated when a PPP link comes up. 0.0.0.0
0.0.0.0
Option Description Default Value
name An existing PPPoA transport. To display transport
names, use the
PPPOA LIST TRANSPORTS
command.
N/A
number An existing PPPoA transport. To display transport
numbers, use the
PPPOA LIST TRANSPORTS
command.
N/A
sustainable cell rate Sustainable Cell Rate; the average cell rate for a VBR
or VBR RT connection. The SCR can be any positive
value that is less than the PortSpeed and the PCR for
the channel.
0
Option Description Default Value