User guide

PPPoA command reference PPPoA
8-141
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa1 remoteip 192.168.103.2
See also PPPOA SHOW TRANSPORT
PPPOA LIST TRANSPORTS
PPPOA SET TRANSPORT LOCALIP
8.8.1.1.35 PPPOA SET TRANSPORT ROUTEMASK
Syntax PPPOA SET TRANSPORT {<name>|<number>} ROUTEMASK <mask>
Description This command sets the subnet mask used by the route that is created when a PPP link
comes up. If it is set to 0.0.0.0, the subnet mask is determined by the IP address of the
remote end of the link. The class of the IP address is obtained during IPCP (Internet Pro-
tocol Control Protocol) negotiation.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoA transport. To display transport
names, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
ip-address The ip address of the local ‘server-end’ of an interface
displayed in the following format: 111.222.254.4
0.0.0.0
Option Description Default Value
name An existing PPPoA transport. To display transport
names, use the PPPOA LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A