User guide

PPPoA command reference PPPoA
8-139
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoa set transport pppoa3 qosclass abr
See also PPPOA SHOW TRANSPORT
PPPOA SET TRANSPORT QOSCLASS
8.8.1.1.33 PPPOA SET TRANSPORT REMOTEDNS
Syntax PPPOA SET TRANSPORT {<name>|<number>} REMOTEDNS <ipaddress>
[<ipaddress2>]
Description This command is a PPP server function.
This command sets the primary and secondary local DNS server addresses that will be
given to a remote PPP peer when the peer requests a primary or secondary DNS server
IP address using IPCP. Setting the secondary IP address is optional.
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
ubr Unspecified Bit Rate; non-constant and unpredictable data
transport rate. PCR (
Peak Cell Rate) is the average and
maximum speed of transmission.
UBR
cbr
Constant Bit Rate; constant demand and predictable
data transport rate. PCR is the average and maximum
speed of transmission.
vbr
Variable Bit Rate; non-constant but predictable data
transport rate that uses
Non-Real-Time (NRT). You can
specify the PCR, SCR, BT and MBS for VBR traffic.
vbrrt
Variable Bit Rate Real-Time; non-constant but predict-
able data transport rate that uses
Real-Time (RT). You
can specify the PCR, SCR, BT and MBS for VBRRT traffic.
abr
Available Bit Rate; non-constant and unpredictable data
transport rate that provides ATM-layer feedback and flow
control.
qfc QFC: ATM flow control protocol that supports ABR.