User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-138
The command allows you to specify the following PVC information:
• The ATM port that will transport data
• VPI (Virtual Path Identifier)
• VCI (Virtual Circuit Identifier)
The port/VPI/VCI combination must be unique for each transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 pvc a1 0 800
See also PPPOA LIST TRANSPORTS
PPPOA SET TRANSPORT DIALIN PVC
PPPOA SET TRANSPORT DIALOUT PVC
PORT LIST
8.8.1.1.32 PPPOA SET TRANSPORT QOSCLASS
Syntax PPPOA SET TRANSPORT {<name>|<number>} QOSCLASS
{UBR|CBR|VBR|VBRRT|ABR|QFC}
Description This command applies to existing PVC transports - it does not apply to SVC transports.
It sets the quality of service class for the transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoA transport. To display transport names, use
the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport numbers,
use the
PPPOA LIST TRANSPORTS command.
N/A
port The system port that is used to transport ATM data. N/A
vpi A field in the ATM header. The VPI is used to identify the vir-
tual path that a circuit belongs to. The VPI can be any value
between 0 and 4095.
N/A
vci Part of the ATM header. The VCI is a tag that identifies which
channel a cell will travel over. The VCI can be any value
between 1 and 65535.
N/A