User guide

PPPoA command reference PPPoA
8-137
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoa set transport pppoa4 port a1
See also pppoa list transports
port list
8.8.1.1.30 PPPOA SET TRANSPORT PRILEVELS
Syntax PPPOA SET TRANSPORT {<name>|<number>} PRILEVELS <prilevels>
Description This command enables support for multiple packet priority levels on the same ATM VC.
Two prilevel values are supported:
• There are no multiple priority levels enabled so the feature is disabled.
• Packets with different priorities set (such as best effort and high priority traffic) are
prioritized on the same ATM VC.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport myrfc prilevels 2
See also PPPOA SHOW TRANSPORT
8.8.1.1.31 PPPOA SET TRANSPORT PVC
Syntax PPPOA SET TRANSPORT {<name>|<number>} PVC <port> <vpi> <vci>
Description This command sets the PVC information for an existing PPPoA transport PVC. The PVC
uses the interface that was specified when the transport was created.
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
port The system port that is used to transport ATM data. N/A
Option Description Default Value
name An existing PPPoA transport. To display transport names, use
the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport numbers,
use the
PPPOA LIST TRANSPORTS command.
N/A
prilevels The number of priority levels available on an ATM transport. 1
Option Description Default Value