User guide

PPPoA command reference PPPoA
8-135
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 mcr 0
See also PPPOA SET TRANSPORT PCR
8.8.1.1.27 PPPOA SET TRANSPORT PASSWORD
Syntax PPPOA SET TRANSPORT {<name>|<number>} PASSWORD <password>
Description This command sets a dial-out password on a named transport. The password is required
when PPP negotiation takes place and is supplied to the remote PPP server for authenti-
cation.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 password mercury
Option Description Default Value
name An existing PPPoA transport. To display transport
names, use the
PPPOA LIST TRANSPORTS
command.
N/A
number An existing PPPoA transport. To display transport
numbers, use the
PPPOA LIST TRANSPORTS
command.
N/A
minimum cell rate Determines the minimum rate at which ATM cells can
be sent along the PPPoA transport.
0
Option Description Default Value
name An existing PPPoA transport. To display transport names, use
the PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport numbers, use
the
PPPOA LIST TRANSPORTS command.
N/A
password An arbitrary word that acts as a dialout password enabling you
to login to the remote end. The PPP server will require the
password when you want to login remotely. It can be made up
of one or more characters and/or digits. To display the pass-
word, use the
PPPOA SHOW TRANSPORT command.
N/A