User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-134
Example --> pppoa set transport pppoa1 localip 192.168.103.2
See also PPPOA SHOW TRANSPORT
PPPOA LIST TRANSPORTS
PPPOA SET TRANSPORT REMOTEIP
8.8.1.1.25 PPPOA SET TRANSPORT MBS
Syntax PPPOA SET TRANSPORT {<name>|<number>} MBS <max burst size>
Description This command applies to existing PVC transports - it does not apply to SVC transports.
It sets the Maximum Burst Size (MBS) for the PPPoA transport.
This command is only valid if you set VBR or VBR RT as the QoS Class using the pppoa
set transport quosclass command.
Example --> pppoa set transport pppoa3 mbs 10
See also PPPOA SET TRANSPORT BT
PPPOA SET TRANSPORT QOSCLASS
8.8.1.1.26 PPPOA SET TRANSPORT MCR
Syntax PPPOA SET TRANSPORT {<name>|<number>} MCR <min cell rate>
Description This command applies to existing PVC transports - it does not apply to SVC transports.
This command sets the minimum cell rate for an existing PPPoA transport.
ip-address The ip address of the local ‘client-end’ of an interface
displayed in the following format: 111.222.254.4
0.0.0.0
Option Description Default Value
name An existing PPPoA transport. To display transport
names, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
maximum burst
size
Controls the maximum burst size for VBR (
Variable
Bit Rate
) and VBR RT (VBR Real Time) channels.
This value overrides an existing BT value (if set). The
MBS can be any value between 0 and 100.
0
Option Description Default Value