User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-130
Example --> pppoa set transport pppoa1 idletimeout 20
See also PPPOA LIST TRANSPORTS
PPPOA SET TRANSPORT LCPECHOEVERY
8.8.1.1.19 PPPOA SET TRANSPORT INTERFACE
Syntax PPPOA SET TRANSPORT {<name>|<number>} INTERFACE <interface>
Description This command sets the PPP interface for an existing PPPoA transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 interface 4
See also PPPOA SHOW TRANSPORT
PPPOA LIST TRANSPORTS
8.8.1.1.20 PPPOA SET TRANSPORT LCPECHOEVERY
Syntax PPPOA SET TRANSPORT
{<name>|<number>} LCPECHOEVERY <interval>
Description This command tells a specified PPP transport to send an LCP (Link Control Protocol)
echo request frame at specified intervals (in seconds). If no reply to the request is
number An existing PPPoA transport. To display transport numbers,
use the PPPOA LIST TRANSPORTS command.
N/A
idletimeout The length of time (in minutes) that a PPPoA session con-
nected to an ISP can remain idle before the session is dis-
abled. The time can be any value between 0 and 60. A value
of 0 means that no idletimeout is set.
0
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the PPPOA LIST TRANSPORTS com-
mand.
N/A
interface The PPP interface to a channel that transports PPPoA
data. Multiple channels can use a single interface. The
interface value can be any positive integer.
N/A
Option Description Default Value