User guide

PPPoA command reference PPPoA
8-129
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa1 headers llc enabled
Options PPPOA LIST TRANSPORTS
PPPOA SHOW TRANSPORT
PPPOA SET TRANSPORT HEADERS HDLC
8.8.1.1.18 PPPOA SET TRANSPORT IDLETIMEOUT
Syntax PPPOA SET TRANSPORT
{<name>|<number >} IDLETIMEOUT <idletime-
out>
Description This command allows you to set some ‘idle’ time out for your LAN connection. If you are
connected to an ISP via PPPoA but fail to send a request for data within a specified time
limit, the PPPoA session is disabled.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
enabled Packets that have LLC headers can be transmitted/
received.
Disabled
(if HDLC
headers are
disabled too,
the default
value is VC
Mux)
disabled Packets that have LLC headers cannot be transmitted/
received.
Option Description Default Value
name An existing PPPoA transport. To display transport names, use
the
PPPOA LIST TRANSPORTS command.
N/A