User guide

PPPoA command reference PPPoA
8-127
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa1 givedns relay enabled
See also PPPOA SET TRANSPORT GIVEDNS CLIENT ENABLED|DISABLED
PPPOA SET TRANSPORT REMOTEDNS
PPPOA SET TRANSPORT DISCOVERDNS PRIMARY
PPPOA SET TRANSPORT DISCOVERDNS SECONDARY
DNS Relay CLI commands
8.8.1.1.16 PPPOA SET TRANSPORT HEADERS HDLC
Syntax PPPOA SET TRANSPORT
{<name>|<number>} HEADERS HDLC
{ENABLED|DISABLED}
Description This command allows you to enable/disable whether your system can transmit and
receive packets containing HDLC headers. If you want LLC packets to be transmitted and
received instead of/as well as HDLC packets, use the PPPOA SET TRANSPORT
HEADERS LLC ENABLED command.
When both HDLC and LLC headers are disabled, the default encapsulation method is VC
multiplexed (VC Mux). PPP determines which format to use to transmit/receive packets
by ‘learning’ the format information from incoming packet headers.
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS command.
N/A
number An existing pppoa transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
enabled IPCP can request a DNS server IP address and then give
the address to DNS relay.
enabled
disabled IPCP cannot request a DNS server IP address and then
give the address to DNS relay.