User guide

PPPoA command reference PPPoA
8-125
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoa set transport pppoa3 discoverdns secondary enabled
See also PPPOA SET TRANSPORT DISCOVERDNS PRIMARY
PPPOA SET TRANSPORT GIVEDNS CLIENT ENABLED|DISABLED
PPPOA SET TRANSPORT GIVEDNS RELAY ENABLED|DISABLED
PPPOA SET TRANSPORT REMOTEDNS
8.8.1.1.13 PPPOA SET TRANSPORT ENABLED|DISABLED
Syntax PPPOA SET TRANSPORT {<name>|<number>} {ENABLED|DISABLED}
Description This command explicitly enables/disables a PPPoA transport. Attaching a transport to an
interface implicitly enables it, but for cases where no attach is performed (for example,
multiple channels on an interface, a PPP session that is not attached but needed for test-
ing purposes) the transport must be enabled explicitly.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> pppoa set transport pppoa1 enabled
See also PPPOA LIST TRANSPORTS
8.8.1.1.14 PPPOA SET TRANSPORT GIVEDNS CLIENT ENABLED|DISABLED
Syntax PPPOA SET TRANSPORT {<name>|<number>} GIVEDNS CLIENT
{ENABLED | DISABLED}
disabled A secondary DNS server IP address is not requested.
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
enabled Enables a PPPoA transport. disabled
disabled Disables a PPPoA transport.
Option Description Default Value