User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-124
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa3 discoverdns primary enabled
See also PPPOA SET TRANSPORT DISCOVERDNS SECONDARY
PPPOA SET TRANSPORT GIVEDNS CLIENT ENABLED|DISABLED
PPPOA SET TRANSPORT GIVEDNS RELAY ENABLED|DISABLED
PPPOA SET TRANSPORT REMOTEDNS
8.8.1.1.12 PPPOA SET TRANSPORT DISCOVERDNS SECONDARY
Syntax PPPOA SET TRANSPORT
{<name>|<number>} DISCOVERDNS SECONDARY
{ENABLED|DISABLED}
Description This command enables/disables whether the secondary DNS server address is requested
from a remote PPP peer using IPCP. The default setting for this command is enabled. The
default setting for the PPPOA SET TRANSPORT GIVEDNS commands is also
enabled.
Note: You must enable one of the PPPOA SET TRANSPORT GIVEDNS commands in order for this
command setting to work. See PPPOA SET TRANSPORT GIVEDNS CLIENT
ENABLED|DISABLED or PPPOA SET TRANSPORT GIVEDNS RELAY ENABLED|DISABLED
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoA transport. To display transport names, use
the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport numbers,
use the
PPPOA LIST TRANSPORTS command.
N/A
enabled A primary DNS server IP address is requested. enabled
disabled A primary DNS server IP address is not requested.
Option Description Default Value
name An existing PPPoA transport. To display transport names, use
the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport numbers,
use the
PPPOA LIST TRANSPORTS command.
N/A
enabled A secondary DNS server IP address is requested. enabled