User guide

PPPoA command reference PPPoA
8-123
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 dialout pvc a1 0 800
See also PPPOA LIST TRANSPORTS
PPPOA SET TRANSPORT DIALIN PVC
PORT LIST
8.8.1.1.11 PPPOA SET TRANSPORT DISCOVERDNS PRIMARY
Syntax PPPOA SET TRANSPORT {<name>|<number>} DISCOVERDNS PRIMARY
{ENABLED|DISABLED}
Description This command enables/disables whether the primary DNS server address is requested
from a remote PPP peer using IPCP. The default setting for this command is enabled. The
default setting for the pppoa set transport givedns commands is also enabled.
Note: You must enable one of the PPPOA SET TRANSPORT GIVEDNS commands in order for this
command setting to work. See PPPOA SET TRANSPORT GIVEDNS CLIENT
ENABLED|DISABLED or PPPOA SET TRANSPORT GIVEDNS RELAY ENABLED|DISABLED
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
port The system port that is used to transport ATM data. N/A
vpi A field in the ATM header. The VPI is used to identify the
virtual path that a circuit belongs to. The VPI can be any
value between 0 and 4095.
N/A
vci Part of the ATM header. The VCI is a tag that identifies
which channel a cell will travel over. The VCI can be any
value between 1 and 65535.
N/A