User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-122
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoa set transport pppoa2 dialin pvc a1 0 800
See also PPPOA LIST TRANSPORTS
PPPOA SET TRANSPORT DIALOUT PVC
PORT LIST
8.8.1.1.10 PPPOA SET TRANSPORT DIALOUT PVC
Syntax PPPOA SET TRANSPORT {<name>|<number>} DIALOUT PVC <port>
<vpi> <vci>
Description This command sets a PPPoA transport to perform dialout over a PVC (Permanent Vir-
tual Circuit). This replaces the transports existing dialin/dialout setting over PVC/SVC.
The PVC uses the interface that was specified when the transport was created.
The command allows you to specify the following PVC information:
• The ATM port that will transport data
•VPI (Virtual Path Identifier)
•VCI (Virtual Circuit Identifier)
The port/VPI/VCI combination must be unique for each transport.
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
port The system port that is used to transport ATM data. N/A
vpi A field in the ATM header. The VPI is used to identify the
virtual path that a circuit belongs to. The VPI can be any
value between 0 and 4095.
N/A