User guide

PPPoA command reference PPPoA
8-119
iMG/RG Software Reference Manual (ADSL Port)
8.8.1.1.5 PPPOA LIST TRANSPORTS
Syntax PPPOA LIST TRANSPORTS
Description This command lists PPPoA transports that have been created using the PPPOA ADD
TRANSPORT commands. It displays the following information about the transports:
• Transport identification number
• Transport name
• ATM port used (if applicable)
• Virtual Circuit Identifier (VCI) used (if applicable)
• Virtual Path Identifier (VPI) used (if applicable)
Example --> pppoa list transports
PPPOA transports:
ID | Name | Port | Vci | Vpi
-----|------------|-----------|-----------|-----------
1 | p2 | N/A | N/A | N/A
2 | p1 | a1 | 800 | 0
------------------------------------------------------
See also PPPOA SHOW TRANSPORT
8.8.1.1.6 PPPOA SET TRANSPORT AUTOCONNECT
Syntax PPPOA SET TRANSPORT {<name>|<number>} AUTOCONNECT
{ENABLED|DISABLED}
Description This command allows you to enable/disable the PPPoA autoconnect function. If enabled,
PPPoA automatically connects to TCP/IP whenever a user requests TCP/IP packets from
a public destination.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS com-
mand.
N/A
enabled Enables PPPoA autoconnect. disabled