User guide

PPPoA PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-118
Example --> pppoa add transport pppoa1 dialout pvc 1 a1 0 800
See also PPPOA LIST TRANSPORTS
PORT LIST
8.8.1.1.3 PPPOA CLEAR TRANSPORTS
Syntax PPPOA CLEAR TRANSPORTS
Description This command deletes all PPPoA transports that were created using the PPPOA ADD
TRANSPORT commands.
Example --> pppoa clear transports
See also PPPOA DELETE TRANSPORT
8.8.1.1.4 PPPOA DELETE TRANSPORT
Syntax PPPOA DELETE TRANSPORT {<name>|<number>}
Description This command deletes a single PPPoA transport. The PVC or SVC attached to the trans-
port is also deleted.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> pppoa delete transport pppoa1
See also PPPOA LIST TRANSPORTS
vpi A field in the ATM header. The VPI is used to identify the vir-
tual path that a circuit belongs to. The VPI can be any value
between 0 and 4095.
N/A
vci Part of the ATM header. The VCI is a tag that identifies which
channel a cell will travel over. The VCI can be any value
between 1 and 65535.
N/A
Option Description Default Value
name An existing PPPoA transport. To display transport names,
use the PPPOA LIST TRANSPORTS command.
N/A
number An existing PPPoA transport. To display transport num-
bers, use the PPPOA LIST TRANSPORTS com-
mand.
N/A
Option Description Default Value