User guide

PPPoA command reference PPPoA
8-117
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoa add transport pppoa1 dialin pvc 1 a1 0 800
See also PPPOA LIST TRANSPORTS
PPPOA SET TRANSPORT VCI
PPPOA SET TRANSPORT VPI
PORT LIST
8.8.1.1.2 PPPOA ADD TRANSPORT DIALOUT PVC
Syntax PPPOA ADD TRANSPORT
<name> DIALOUT PVC <interface> <port> <vpi>
<vci>
Description This command creates a PPPoA transport that performs dialout over a PVC (Permanent
Virtual Circuit). It allows you to specify the following PVC information:
• The PPP interface to the channel that the PVC will use
• The ATM port that will transport data
•VPI (Virtual Path Identifier)
•VCI (Virtual Circuit Identifier)
The port/VPI/VCI combination must be unique for each transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
vpi A field in the ATM header. The VPI is used to identify the
virtual path that a circuit belongs to. The VPI can be any
value between 0 and 4095.
N/A
vci Part of the ATM header. The VCI is a tag that identifies
which channel a cell will travel over. The VCI can be any
value between 1 and 65535.
N/A
Option Description Default Value
name An arbitrary name that identifies the transport. It can be
made up of one or more letters or a combination of letters
and digits, but it cannot start with a digit.
N/A
interface The PPP interface to a channel that transports PPPoA data.
Multiple channels can use a single interface. The interface
value can be any positive integer.
N/A
port The system port that is used to transport ATM data. N/A
Option Description Default Value