User guide

PPPoA PPPoA command reference

iMG/RG Software Reference Manual (ADSL Port)

8-116

8.8.1.1.1 PPPOA ADD TRANSPORT DIALIN PVC

Example PPPOA ADD TRANSPORT <name> DIALIN PVC <interface> <port> <vpi> <vci>

• This command creates a PPPoA transport that accepts dialling connections over a

PVC (Permanent Virtual Circuit). It allows you to specify the following information:

• The PPP interface to the channel that the PVC will use

• The ATM port that will transport data

•VPI (Virtual Path Identifier)

•VCI (Virtual Circuit Identifier)

The port/VPI/VCI combination must be unique for each transport.

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

PPPOA SET TRANSPORT SUBNETMASK XX

PPPOA SET TRANSPORT THEYLOGIN XXX

PPPOA SET TRANSPORT USERNAME XXX

PPPOA SET TRANSPORT VCI XXX

PPPOA SET TRANSPORT VPI XXX

PPPOA SET TRANSPORT WELOGIN XXX

PPPOA SHOW TRANSPORT XXX

Option Description Default Value

name An arbitrary name that identifies the transport. It can be

made up of one or more letters or a combination of let-

ters and digits, but it cannot start with a digit.

N/A

interface The PPP interface to a channel that transports PPPoA

data. Multiple channels can use a single interface. The

interface value can be any positive integer.

N/A

port The system port that is used to transport ATM data. N/A

TABLE 8-8 PPPOA Command

Commands

Fiber

E Modular

ADSL