User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-112
• LCP Max Configure
• LCP Max Failure
• LCP Max Terminate
• LCP Echo Every
• Autoconnect status (true or false)
• User Idle Timeout setting (in minutes)
• Access concentrator
• Service name
•Port name
• VPI (PVC transport only)
• VCI (PVC transport only)
• Quality of Service (QoS) class (PVC transport only)
• Peak cell rate (PVC transport only)
• Burst tolerance (PVC transport only)
• Sustainable Cell Rate (SCR) (PVC transport only)
• Maximum burst size (MBS) (PVC transport only)
• Maximum Cell Rate (MCR) (PVC transport only)
• Packet Priority Levels setting
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe show transport ppp-ext
PPP Transport: ppp-ext
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A