User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-110
Example --> pppoe set transport pppoe2 username jsmith
See also PPPOE SET TRANSPORT PASSWORD
8.7.4.1.54 PPPOE SET TRANSPORT WELOGIN
Syntax PPPOE SET TRANSPORT
{<name>|<number>} WELOGIN
{NONE|AUTO|PAP|CHAP}
Description This command sets the authentication protocol used to connect to external PPP servers
(dialout).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
number An existing PPPoE transport. To display transport num-
bers, use the PPPOE LIST TRANSPORTS com-
mand.
N/A
username A name that identifies a user and, together with the dia-
lout password, enables a user to login to the remote end.
The PPP server will require the username when the user
wants to login remotely. It can be made up of one or more
characters and/or digits. To display the username, use the
PPPOE SHOW TRANSPORT command.
N/A
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
none No authentication method is used. None
auto The authentication protocol used by the remote PPP
server is discovered and used.
pap Password Authentication Protocol; the server sends an
authentication request to the remote user dialing in. PAP
passes the unencrypted username and password and iden-
tifies the remote end.