User guide

PPPoE command reference PPPoE
8-109
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoe set transport pppoe2 theylogin pap
See also PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
SYSTEM ADD USER
SYSTEM SET USER MAYDIALIN
8.7.4.1.53 PPPOE SET TRANSPORT USERNAME
Syntax PPPOE SET TRANSPORT {<name>|<number>} USERNAME <username>
Description This command sets a (dialout) username on a named transport. The username is required
when PPP negotiation takes place and is supplied to the remote PPP server for authenti-
cation.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the PPPOE LIST TRANSPORTS com-
mand.
N/A
none No authentication method was set. None
pap Password Authentication Protocol: the server sends an
authentication request to the remote user dialing in. PAP
passes the unencrypted username and password and iden-
tifies the remote end.
chap Challenge Handshake Authentication Protocol; the server
sends an authentication request to the remote user dialing
in. PAP passes the encrypted username and password and
identifies the remote end.
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A