User guide
PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-108
Example --> pppoe set transport START/STOP TEST
See also PPPOE LIST TRANSPORTS
8.7.4.1.51 PPPOE SET TRANSPORT SUBNETMASK
Syntax PPPOE SET TRANSPORT {<name>|<number>} SUBNETMASK <mask>
Description This command sets the subnet mask used for the local IP interface connected to the PPP
transport. If the value 0.0.0.0 is supplied, the netmask will be calculated from the class of
the IP address obtained during IPCP negotiation.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe1 subnetmask 255.255.255.0
See also PPPOE LIST TRANSPORTS
8.7.4.1.52 PPPOE SET TRANSPORT THEYLOGIN
Syntax PPPOE SET TRANSPORT
{<name>|<number>} THEYLOGIN
{NONE|PAP|CHAP}
Description This command sets the authentication method that remote PPP clients must use to dialin
to the server. If authentication is used, clients must use the specified authentication
method and provide the username set using the SYSTEM ADD USER command.
This command is only valid if the user had maydialin set using the SYSTEM SET LOGIN
MAYDIALIN command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the PPPOE LIST TRANSPORTS com-
mand.
N/A
mask The subnet mask used by the local IP interface connected
to the PPP transport.
0.0.0.0