User guide

PPPoE command reference PPPoE
8-105
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoe set transport pppoe1 routemask 0.0.0.0
See also PPPOE SHOW TRANSPORT
PPPOE LIST TRANSPORTS
8.7.4.1.47 PPPOE SET TRANSPORT SCR
Syntax PPPOE SET TRANSPORT {<name>|<number>} SCR <sustainable cell
rate>
Description This command sets the sustainable cell rate for an existing PPPoE transport that performs
dialout over PVC. This command is only valid if you set VBR or VBR RT as the QoS Class
using the pppoe set transport qosclass command.
Example --> pppoe set transport pppoe2 scr 25000
See also PPPOE SET TRANSPORT QOSCLASS
Option Description Default Value
name An existing PPPoE transport. To display trans-
port names, use the pppoe list transports com-
mand.
N/A
number An existing PPPoE transport. To display trans-
port numbers, use the pppoe list transports
command.
N/A
mask The subnet mask that is used for the route that
is created when a PPP link comes up. 0.0.0.0
0.0.0.0
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS
command.
N/A
number An existing PPPoE transport. To display transport
numbers, use the
PPPOE LIST TRANSPORTS
command.
N/A
sustainable cell rate the average cell rate for a VBR or VBR RT connec-
tion. The SCR can be any positive value that is less
than the PortSpeed and the PCR for the channel.
0