User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-104
Example --> pppoe set transport pppoe1 remoteip 192.168.103.2
See also PPPOE SHOW TRANSPORT
PPPOE LIST TRANSPORTS
PPPOE SET TRANSPORT LOCALIP
8.7.4.1.46 PPPOE SET TRANSPORT ROUTEMASK
Syntax PPPOE SET TRANSPORT {<name>|<number>} ROUTEMASK <mask>
Description This command sets the subnet mask used by the route that is created when a PPP link
comes up. If it is set to 0.0.0.0, the subnet mask is determined by the IP address of the
remote end of the link. The class of the IP address is obtained during IPCP (Internet Proto-
col Control Protocol) negotiation.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).