User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-102
Example --> pppoe set transport pppoe1 randomizeconnectionattempts
enabled
See also PPPOE LIST TRANSPORTS
8.7.4.1.44 PPPOE SET TRANSPORT REMOTEDNS
Syntax PPPOE SET TRANSPORT
{<name>|<number>} REMOTEDNS <ipaddress>
[<ipaddress2>]
Description This command is a PPP server function.
This command sets the primary and secondary local DNS server addresses that will be
given to a remote PPP peer when the peer requests a primary or secondary DNS server
IP address using IPCP. Setting the secondary IP address is optional.
If you want to delete an IP address, set the IP address to 0.0.0.0.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
enabled Enable the “reauthtimer” option Disabled
disabled Disable the “reauthtimer” option
Option Description Default Value
name An existing PPPoE transport. To display trans-
port names, use the
PPPOE LIST TRANS-
PORTS
command.
N/A
number An existing PPPoE transport. To display trans-
port numbers, use the
PPPOE LIST
TRANSPORTS
command.
N/A