User guide

PPPoE command reference PPPoE
8-97
iMG/RG Software Reference Manual (ADSL Port)
8.7.4.1.37 PPPOE SET TRANSPORT PASSWORD
Syntax PPPOE SET TRANSPORT {<name>|<number>} PASSWORD <password>
Description This command sets a dialout password on a named transport. The password is required
when PPP negotiation takes place and is supplied to the remote PPP server for authenti-
cation.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe2 password mercury
See also PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT USERNAME
8.7.4.1.38 PPPOE SET TRANSPORT PCR
Syntax PPPOE SET TRANSPORT {<name>|<number>} PCR <peak cell rate>
Description This command sets the peak cell rate (pcr) for an existing PPPoE transport that performs
dialout over PVC.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names, use
the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport numbers,
use the PPPOE LIST TRANSPORTS command.
N/A
password An arbitrary word that acts as a dialout password enabling
the login to the remote end. The PPP server requires the
password when remote login is performed. It can be made up
of one or more characters and/or digits. To display the pass-
word, use the
PPPOE SHOW TRANSPORT command.
N/A