User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-96
Example --> pppoe set transport pppoe3 mbs 10
See also PPPOE SET TRANSPORT BT
PPPOE SET TRANSPORT QOSCLASS
8.7.4.1.36 PPPOE SET TRANSPORT MCR
Syntax PPPOE SET TRANSPORT {<name>|<number>} MCR <min cell rate>
Description This command sets the minimum cell rate for an existing PPPoE transport that performs
dialout over PVC.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe2 mcr 0
See also PPPOE SET TRANSPORT PCR
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the pppoe list transports command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the pppoe list transports command.
N/A
maximum burst
size
Controls the maximum burst size for VBR (Variable Bit
Rate) and VBR RT (VBR Real Time) channels. This value
overrides an existing BT value (if set).
The MBS can be any value between 0 and 100.
0
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
minimum cell
rate
Determines the minimum rate at which ATM cells may
be sent along the PPPoE transport.
0