User guide

PPPoE command reference PPPoE
8-95
iMG/RG Software Reference Manual (ADSL Port)
8.7.4.1.34 PPPOE SET TRANSPORT MAXREAUTHATTEMPTS
Syntax PPPOE SET TRANSPORT
{<name>|<number>} MAXREAUTHATTEMPTS <max reau-
thattempts>
Description This command is used to specify the number of re-authentication attempts in case of
authentication failure. After the specified number of re-authentication attempts fail, there
would be no more configure requests from PPPoE transports until the unsername and/or
password are reset.
A zero (default) value specifies inifinate connection attempts.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe3 maxreauthattempts 10
See also PPPOE SET TRANSPORT REAUTHTIMER
8.7.4.1.35 PPPOE SET TRANSPORT MBS
Syntax PPPOE SET TRANSPORT {<name>|<number>} MBS <max burst size>
Description This command sets the maximum burst size (MBS) for an existing PPPoE transport that
performs dialout over PVC.
Description This command is only valid if you set VBR or VBR RT as the QoS Class using the PPPOE
SET TRANSPORT QUOSCLASS command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the pppoe list transports command.
N/A
number An existing PPPoE transport. To display transport
numbers, use the pppoe list transports command.
N/A
maxreauthattempts A number tht specifies the maximum re-authentica-
tion requests that can be made
0