User guide

PPPoE command reference PPPoE
8-91
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each optionthat can be specified with this
command and a default value (if applicable).
Example --> pppoe set transport pppoe2 lcpechoevery 0
See also PPPOE SHOW TRANSPORT
PPPOE LIST TRANSPORTS
8.7.4.1.29 PPPOE SET TRANSPORT LCPMAXCONF
Syntax PPOE SET TRANSPORT
{<name>|<number>} LCPMAXCONF <lcp max config-
ure>
Description This command sets the Link Control Protocol (LCP) maximum configure number for an
existing PPPoE transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the PPPOE LIST TRANSPORTS com-
mand.
N/A
interval The length of time (in seconds) between LCP echo
request frames being sent. If you do not want echo
request frames to be sent, specify ‘0’ as the interval.
10 seconds
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A