User guide

PPPoE command reference PPPoE
8-89
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe1 idletime lantrafficonly
enabled
See also PPPOE LIST TRANSPORTS
PPOE SET TRANSPORT LCPECHOEVERY
8.7.4.1.26 PPPOE SET TRANSPORT IDLETIMEOUT
Syntax PPPOE SET TRANSPORT
{<name>|<number>} IDLETIMEOUT <idletime-
out>
Description This command allows you to set a ‘idle’ time out for your LAN connection. If you are
connected to an ISP via PPPoE but fail to send a request for data within a specified time
limit, the PPPoE session is disabled.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the PPPOE LIST TRANSPORTS com-
mand.
N/A
enabled Enable the ideltimeout for LAN traffic only Disabled
disabled Include WAN traffic for the idletimeout interval.
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A