User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-88
See also PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.24 PPPOE SET TRANSPORT HEADERS VCMUX_ROUTED
Syntax PPPOE SET TRANSPORT
{<name>|<number>} HEADERS VCMUX_BRIDGED
{ENABLED|DISABLED}
Description This command allows you to enable/disable whether your system can transmit and
receive packets containing vcmux_routed packets. If you want vcmux_bridged packets to
be transmitted and received instead of vcmux_routed packets, use the PPPOE SET
TRANSPORT HEADERS VCMUX_BRIDGEDcommand.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe1 headers vcmux_bridged enabled
See also PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.25 PPPOE SET TRANSPORT IDLETIME LANTRAFFICONLY
Syntax PPPOE SET TRANSPORT
{<name>|<number>} IDLETIME LANTRAFFICONLY
{ENABLED|DISABLED}
Description This command allows you to specify that the value of ideltime which has been set, to be
valid when there is no IP activity on the lan side. With the ideltime lantrafficonly set as
disabled, the value of ideltime takes into account the IP traffic from the wan side also.
However when set as enabled, it takes only the lan side IP traffic into account.
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport numbers,
use
THE PPPOE LIST TRANSPORTS command.
N/A
enabled The encapsulation method to be used is Vcmux Routed Disabled
disabled Packets that have vcmux_routed headers cannot be trans-
mitted/received.