User guide

PPPoE command reference PPPoE
8-87
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoe set transport pppoe1 headers llc_routed enabled
See also PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.23 PPPOE SET TRANSPORT HEADERS VCMUX_BRIDGED
Example PPPOE SET TRANSPORT
{<name>|<number>} HEADERS VCMUX_BRIDGED
{ENABLED|DISABLED}
Description This command allows you to enable/disable whether your system can transmit and
receive packets containing vcmux_bridged packets. If you want vcmux_routed packets to
be transmitted and received instead of vcmux_bridged packets, use the PPPOE SET
TRANSPORT HEADERS VCMUX_ROUTED command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe1 headers vcmux_bridged enabled
number An existing PPPoE transport. To display transport num-
bers, use
THE PPPOE LIST TRANSPORTS com-
mand.
N/A
enabled The encapsulation method to be used is llc_routed Disabled
disabled Packets that have llc_routed headers cannot be trans-
mitted/received.
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use
THE PPPOE LIST TRANSPORTS com-
mand.
N/A
enabled The encapsulation method to be used is Vcmux Bridged Disabled
disabled Packets that have vcmux_bridged headers cannot be trans-
mitted/received.