User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-86
Example --> pppoe set transport pppoe1 headers llc enabled
See also PPPOE LIST TRANSPORTS
PPPOE SHOW TRANSPORT
PPPOE SET TRANSPORT HEADERS LLC
8.7.4.1.22 PPPOE SET TRANSPORT HEADERS LLC_ROUTED
Syntax PPPOE SET TRANSPORT
{<name>|<number>} HEADERS LLC_ROUTED
{ENABLED|DISABLED}
Description This command allows you to enable/disable whether your system can transmit and
receive packets containing llc_routed packets. If you want LLC_bridged packets to be
transmitted and received instead of llc_routed packets, use the PPPOE SET TRANS-
PORT HEADERS LLC ENABLED command.
When llc_routed headers are disabled, the default encapsulation method is llc_bridged.
PPP determines which format to use to transmit/receive packets by ‘learning’ the format
information from incoming packet headers.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names, use
the
PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport numbers,
use the
PPPOE LIST TRANSPORTS command.
N/A
enabled Packets that have LLC headers can be transmitted/received. enabled
disabled Packets that have LLC headers can not be transmitted/
received.
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A