User guide

PPPoE command reference PPPoE
8-83
iMG/RG Software Reference Manual (ADSL Port)
Example pppoe set transport pppoe1 pppeventlevel 6
See also See alsoPPPOE LIST TRANSPORTS
8.7.4.1.19 PPPOE SET TRANSPORT GIVEDNS CLIENT ENABLED|DISABLED
Syntax PPPOE SET TRANSPORT
{<name>|<number>} GIVEDNS CLIENT {ENABLED |
DISABLED}
Description This command controls whether the PPP Internet Protocol Control Protocol (IPCP) can
request a DNS server IP address for a remote PPP peer. Once IPCP has discovered the
DNS server IP address, it automatically gives the address to the local DNS client so that a
connection can be established.
You must have the DNS client process included in your image build in order to use this
protocol.
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
pppevent level The debug tracing level from 1 to 9.
1: Only very serious errors reported
2: Definite protocol errors or very significant events are
reported
3: Links going up/down reported
4: Every packet and significant state change is reported.
5: Every packet sent/received is disassembled and hex
dumped
6: Levels 1-5 plus assignment of the IP addresses to the
interface and extra authentication information (CHAP/
PAP) reported.
7: Levels 1-6 plus tunneling reported.
8: Levels 1-7 plus minor phase changes reported.
9: Levels 1-8 plus all timer information reported.
1