User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-82
Example --> pppoe set transport pppoe1 enabled
See also See alsoPPPOE LIST TRANSPORTS
8.7.4.1.17 PPPOE SET TRANSPORT ETH
Syntax PPPOE SET TRANSPORT {<name>|<number>} ETH <port>
Description This command sets the Ethernet port that an existing PPPoE transport uses to transport
PPPoE data.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> pppoe set transport pppoe3 eth ethernet0
See also PPPOE LIST TRANSPORTS
ETHERNET LIST PORTS
8.7.4.1.18 PPPOE SET TRANSPORT EVENTLEVEL
Syntax PPPOE SET TRANSPORT
{<name>|<number>} EVENTLEVEL <pppe-
ventlevel>
Description This command sets a debugging tracing event level for PPP. The <pppeventlevel> can be
any level between 1 and 9.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
disabled Disables a PPPoE transport.
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use THE PPPOE LIST TRANSPORTS com-
mand.
N/A
port The system port that is used to transport Ethernet data.
To display Ethernet ports, use the ethernet list ports com-
mand.
N/A