User guide

PPPoE command reference PPPoE
8-81
iMG/RG Software Reference Manual (ADSL Port)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe3 discoveripsubnet enabled
See also PPPOE SHOW TRANSPORT
8.7.4.1.16 PPPOE SET TRANSPORT ENABLED|DISABLED
Syntax PPPOE SET TRANSPORT {<name>|<number>} {ENABLED|DISABLED}
Description This command explicitly enables/disables a PPPoE transport. Attaching a transport to an
interface implicitly enables it, but for cases where no attach is performed (for example,
multiple channels on an interface, a PPP session that is not attached but needed for test-
ing purposes) the transport must be enabled explicitly.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the PPPOE LIST TRANSPORTS com-
mand.
N/A
enabled Enables PPP IPCP subnet discovery. disabled
disabled Disables PPP IPCP subnet discovery.
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS com-
mand.
N/A
enabled Enables a PPPoE transport. disabled