User guide

Emergency command reference Emergency
1-53
iMG/RG Software Reference Manual (System Configuration)
1.3.4.1.5 EMERGENCY SET IPINTERFACE GATEWAY
Syntax Syntax EMERGENCY SET IPINTERFACE GATEWAY <ip_address>
Description This command sets the default gateway ip address to be used when the system runs in
recovery mode.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example emergency set ipinterface gateway 192.168.1.254
See also EMERGENCY SET IPINTERFACE
EMERGENCY SHOW
EMERGENCY UPDATE
1.3.4.1.6 EMERGENCY SET IPINTERFACE IPADDRESS
Syntax
EMERGENCY SET IPINTERFACE IPADDRESS <ip_address> NETMASK <netmask>
Description This command sets the ip interface address and netmask to be used when the system
runs
in recovery mode.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
Example emergency set ipinterface ipaddress 192.168.1.1 netmask
255.255.255.0
Option Description Default Value
ip_address The default gateway ipaddress in IPv4 format (e.g.
192.168.1.254)
N/A
Option Description Default Value
p_address The ip interface address in IPv4 format (e.g.
192.168.1.1)
N/A
netmask Network for the interface N/A