User guide

PPPoE command reference PPPoE
8-79
iMG/RG Software Reference Manual (ADSL Port)
Example --> pppoe set transport pppoe2 dialout
See also PPPOE LIST TRANSPORTS
8.7.4.1.13 PPPOE SET TRANSPORT DISCOVERDNS PRIMARY
Syntax PPPOE SET TRANSPORT
{<name>|<number>} DISCOVERDNS PRIMARY
{ENABLED|DISABLED}
Description This command enables/disables whether the primary DNS server address is requested
from a remote PPP peer using IPCP. The default setting for this command is enabled. The
default setting for the PPPOE SET TRANSPORT GIVEDNS command is also enabled.
Note: You must enable one of the pppoe set transport givedns commands in order for this command
setting to work. See PPPOE SET TRANSPORT GIVEDNS CLIENT ENABLED|DISABLED or
PPPOE SET TRANSPORT GIVEDNS RELAY ENABLED|DISABLED
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe3 discoverdns primary enabled
See also PPPOE SET TRANSPORT DISCOVERDNS SECONDARY
PPPOE SET TRANSPORT GIVEDNS CLIENT ENABLED|DISABLED
PPPOE SET TRANSPORT GIVEDNS RELAY ENABLED|DISABLED
PPPOE SET TRANSPORT REMOTEDNS
number An existing PPPoE transport. To display transport numbers,
use the pppoe list transports command.
N/A
Option Description Default Value
name An existing PPPoE transport. To display transport names, use
the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport numbers, use
the PPPOE LIST TRANSPORTS command.
N/A
enabled A primary DNS server IP address is requested. enabled
disabled A primary DNS server IP address is not requested.