User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-76
Example This example creates a filter to prevent TCP SNMPTRAP packets from starting PPP auto-
connect:
Example --> pppoe set transport pppoe1 autoconnect filter add tcpport 162
See also PPPOE LIST TRANSPORTS
PPPOE SET TRANSPORT AUTOCONNECT
8.7.4.1.9 PPPOE SET TRANSPORT BT
Syntax PPPOE SET TRANSPORT {<name>|<number>} BT <burst tolerance>
Description his command sets the burst tolerance (bt) for an existing PPPoE transport. This com-
mand is only valid if you set VBR or VBR RT as the QoS Class using the pppoe set trans-
port qosclass command.
Options he following table gives the range of values for each option that can be specified with this
command and a default value (if applicable).
Option Description Default Value
name An existing PPPoE transport. To display transport names,
use the pppoe list transports command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the pppoe list transports command.
N/A
add Adds an autoconnect filter to the specified port. N/A
delete Deletes an existing autoconnect filter from the specified
port.
N/A
tcpportadd The TCP port that you want to set the autoconnect filter
on.
N/A
udpportadd The UDP port that you want to set the autoconnect filter
on.
N/A
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the pppoe list transports command.
N/A
number An existing PPPoE transport. To display transport
numbers, use the pppoe list transports command.
N/A