User guide

PPPoE PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-74
See also PPPOE SHOW TRANSPORT
8.7.4.1.6 PPPOE SET TRANSPORT ACCESSCONCENTRATOR
Syntax PPPOE SET TRANSPORT
{<name>|<number>} ACCESSCONCENTRATOR <con-
centrator>
Description This command specifies the access concentrator that you want PPPoE to connect to.
You can also specify a service name using the set transport servicename command so
that PPPoE will only accept a specific service via a specific access concentrator.
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> pppoe set transport pppoe1 accessconcentrator server5
See also PPPOE LIST TRANSPORTS
PPPOE SET TRANSPORT SERVICENAME
PPPOE SHOW TRANSPORT
Note: For more information on PPPoE and access concentrators, see RFC2516; http://
www.ietf.org/rfc/rfc2516.txt
8.7.4.1.7 PPPOE SET TRANSPORT AUTOCONNECT
Syntax PPPOE SET TRANSPORT
{<name>|<number>} AUTOCONNECT {ENABLED|DIS-
ABLED}
Option Description Default Value
name An existing PPPoE transport. To display transport
names, use the pppoe list transports command.
N/A
number An existing PPPoE transport. To display transport num-
bers, use the pppoe list transports command.
N/A
concentrator A PPPoE tag that identifies a remote access concentra-
tor (or PPPoE server). PPPoE will only connect to the
named access concentrator. If no concentrator tag is
set, PPPoE connects to the first access concentrator
that responds. The tag name/number is determined by
your ISP.
Empty string